Name: PE Granulating Machine, PE Granulator, PE Plastic Granulating Machine, PE Plastic Granulator, Plastic Granulator.
Model: CX1700
FEATURES:
Material properties
corrosion resistance, electrical insulation, especially high frequency insulation, excellent, chloride, irradiation modification, glass fiber reinforced. The melting point of low pressure polyethylene, rigidity, hardness and high strength, small water imbibition, good electric properties and radiation resistance; High pressure polyethylene softness, elongation, impact strength and permeability is better; Ultra-high molecular weight polyethylene high impact strength, fatigue resistance, wear resistance, low pressure polyethylene to make corrosion resistant parts and insulation parts; High pressure polyethylene thin films are suitable for, etc.; Ultra-high molecular weight polyethylene is suitable for making shock absorption, abrasion resistance and transmission parts.
Formability
1. The crystal material, moisture absorption, need not to fully dry, liquidity good liquidity is sensitive to pressure and molding time with high-pressure injection, uniform temperature, filling speed, pressure maintaining full. Should not be in direct gate, to prevent uneven contraction, the internal stress increased. Pay attention to choose the gate location, to prevent shrinkage and distortion.
2. The scope and contraction value is big, obvious directivity, easy to deformed. The appropriate cooling speed slow, mold slag hole, and the cooling system
3. The heating time shoulds not be too long, otherwise it will decompose, burns.
4. Soft plastic parts have shallow lateral recess, forced demoulding.
5. Possible melting body is broken, and should not be in contact with the organic solvent, to prevent cracking. PE plastic granulator technology; Twin-screw granulator high mixing machine, spiral automatic feeding machine -- -- -- -- -- - twin-screw granulator cooling tank -- -- -- -- -- -- -- -- -- -- -- -- -- -- dry machine -- -- -- -- -- -- -- the granule
Parameters Below:
Service of us :
We can design whole line machine for granule production. We also provide techncial for granule production, our engineer have rich experiences in this area. we go to your facotry to help intallation and guide the worker .
The production of all products are follow ISO9001:2008 organization system, from raw material processing to assembe and finally test running. even the packing, and delivery. Also we track the use of machine,installation, products producing technical ect.
All we do is for longterm cooperation , " CREATE TURST" !
Model: CX1700
FEATURES:
Material properties
corrosion resistance, electrical insulation, especially high frequency insulation, excellent, chloride, irradiation modification, glass fiber reinforced. The melting point of low pressure polyethylene, rigidity, hardness and high strength, small water imbibition, good electric properties and radiation resistance; High pressure polyethylene softness, elongation, impact strength and permeability is better; Ultra-high molecular weight polyethylene high impact strength, fatigue resistance, wear resistance, low pressure polyethylene to make corrosion resistant parts and insulation parts; High pressure polyethylene thin films are suitable for, etc.; Ultra-high molecular weight polyethylene is suitable for making shock absorption, abrasion resistance and transmission parts.
Formability
1. The crystal material, moisture absorption, need not to fully dry, liquidity good liquidity is sensitive to pressure and molding time with high-pressure injection, uniform temperature, filling speed, pressure maintaining full. Should not be in direct gate, to prevent uneven contraction, the internal stress increased. Pay attention to choose the gate location, to prevent shrinkage and distortion.
2. The scope and contraction value is big, obvious directivity, easy to deformed. The appropriate cooling speed slow, mold slag hole, and the cooling system
3. The heating time shoulds not be too long, otherwise it will decompose, burns.
4. Soft plastic parts have shallow lateral recess, forced demoulding.
5. Possible melting body is broken, and should not be in contact with the organic solvent, to prevent cracking. PE plastic granulator technology; Twin-screw granulator high mixing machine, spiral automatic feeding machine -- -- -- -- -- - twin-screw granulator cooling tank -- -- -- -- -- -- -- -- -- -- -- -- -- -- dry machine -- -- -- -- -- -- -- the granule
Parameters Below:
| Name | Polyethylene |
| Proportion | 0.94-0.96g/cm3 |
| Mold Shrinkage | 1.5-3.6% |
| Mold Temperature | 140-220ºC |
| Drying Condition |
Service of us :
We can design whole line machine for granule production. We also provide techncial for granule production, our engineer have rich experiences in this area. we go to your facotry to help intallation and guide the worker .
The production of all products are follow ISO9001:2008 organization system, from raw material processing to assembe and finally test running. even the packing, and delivery. Also we track the use of machine,installation, products producing technical ect.
All we do is for longterm cooperation , " CREATE TURST" !